Last spring, I shared this free pattern with you.
And I have had questions about how to finish it.
This time, it was punched with a blue background.
After punching, trim the weavers cloth to around 1/4″
and carefully press the empty weavers cloth to the back.
When you turn it back over,
you shouldn’t be able to see any weavers cloth.
You will also need felted wool for the backing,
some marking chalk, a pinback, and ribbon for around the edge.
Place the finished punch needle project on top of the wool
and mark around it with chalk.
Cut out the wool oval.
Layer the wool oval and the punch needle piece, wrong sides together.
If you want to add some dimension, you can add a little stuffing in between the layers.
The edge of this project was finished with crinkly ribbon.
It was finished in the same manner as this project.
(There are pictures and instructions for finishing a similar project here.)
Sew on the pin and enjoy!